IC-PW1

H.F. & 6m Amplifier

Wide frequency coverage with 1 KW output *

All HF bands plus 50 MHz are covered. The IC-PW1 provides a stable, clean and low distortion 1 kW from 1.8 MHz to 50 MHz * . In addition, full duty cycle (even during more demanding RTTY or SSTV operation) and full break -in operation are possible. Great for DX'peditions or contest operation. *Guaranteed within amateur bands only.

Wide ALC adjustable range

Internal circuitry allows the ALC to be adjusted over a wide range. This means that the IC-PW1 can be used with almost any HF, 6 m or HF/6 m rigs - not only Icom rigs * ! *Ask your dealer about usable exciters.

Compact body

Dimensions, including amplifier, power supply, tuner and controller, are only 350(H) x 269(W) x 378(D)mm* And, because the controller is detachable, the IC-PW1 can be installed almost anywhere in your shack. *6 25 / 32 (H) x 2 25 / 32 (W) x 9 1 / 16 in.

Other outstanding features

Automatic antenna tuner built-in
Automatic AC input voltage selector is employed
Current (Ip), Voltage (Vp), temperatuer, SWR and output power protectors are available

Specifications

General
Frequency Coverage (MHz): 1.800 - 1.9993.500 - 3.9997.000 - 7.30010.100 - 10.15014.000 - 14.35018.068 - 18.168 21.000 - 21.45024.890 - 24.990 *28.000 - 28.700 *50.000 - 54.000 *Inhibited in the US version.
Power supply requirements:180 - 264 V AC or 90 - 132 V AC (single phase; 50 / 60 Hz)
Current Drain: Less than 15 A (max. output at 200 V) Less than 20 A (max. output at 100 V)
Usable temperature range: -10°C to +40°C;+14°F to +104°F.
Duty cycle: Full duty
Input connector: SO-239 x 2 (50 ohm)
Output connector: SO-239 x 4 (50 ohm)
Linear Amplifier Output power: AC Input 180-264 V AC 90-132 V ACCW, RTTY 1kW 500W(SSB) 1kW PEP (500W) PEP
Driving power: Max. 100 W
Spurious emissions: Less than -60 dB (HF bands) Less than -50 dB (50 MHz)
Antenna Tuner Output matching range(tuner switch ON): 16.7 ohms to 150 ohms
impedance (HF bands) 20.0 ohms to 125 ohms
Iimpedance (50 MHz)
Auto tuning accuracy: VSWR 1.5:1 or less
Min. required input power: 60W
Insertion loss: Less than 1 dB (after tuning)

Supplied Accessories

Controller separation cable
ACC cables
Coaxial cable with PL-259 plugs

Factory Authorised

5_year

Last Updated (Tuesday, 10 November 2009 21:31)